microTargeting™ Position Display System
More Images
Catalog Number: 66-DS-PD
The microTargeting™ Position Display Accessory adds Position Display capability to the basic STar™ Drive M/E System. Simply remove the protective cover of the drive, insert the encoder through the sterile drape sleeve, attach to the drive and zero the drive. Your distance to target is now shown on the Display Module! Manual advancement of the drive combined with readily available depth readings can make targeting more efficient!
The mechanical components of the STar Drive™ System are steam sterilizable for rapid turn around and ease of use in all environments. The Display Assembly does not require sterilization; it is designed to use sterile draping sleeves. The sterile sleeve is easily applied and does not interfere with function. The Display Assembly is inserted inside the sterile drape which has pre-punched holes at the stretch material tip for a tight seal. The draped assembly is then attached to the Drive. The cable inside the drape extends outside the sterile field for connection to the Control module. The position of the tip of the microrecording, lesion or stimulating electrode relative to the zero position is shown on a 1cm high LED display to one micron precision. An indicator arrow points down when the drive is being advanced, up when it is retracted, and to the display when the drive is at rest.
The Display Configuration retains the manual control of the drive advance.
The Display Module includes a serial port which can be accessed with simple commands so that the display data can be easily accessed through any computer including surgical navigation and data acquisition systems.
FHC offers a convenient storage case which can be configured to hold the non sterilized components.
1. Display Assembly:
Material: Radel R 5000 series (Black)
Dimensions: Height: 3.81cm (1.50”)
Width: 2.39cm (0.94”)
Length: 3.18cm (1.25”) Ø
Weight: 49 grams (3 oz.), not including connector/cable
Cable Length/Diameter: 3.0m (9.8’), 3.5mm (0.14”) Ø, shielded
Connector: 9 pin indexed, Color coded blue with strain relief (mates with 66-EL-MS)
Interface: Electrically isolated from drive system
Linear Resolution: 1.0 microns (calculated)
Sterilization: Do not sterilize, use sterile draping system
2. Display module:
Dimensions:
Display Module Power Adaptor
Width: 8.9 cm (3.5”) 7.4 cm (2.9”)
Height: 8.9 cm (3.5”) 4.4 cm (1.8”)
Length: 11.6 cm (4.6”) 14.9 cm (5.87”)
Weight: 480 g (1.2 lbs) 0.74 kg (1.6 lbs) (inc cable and plug)
Case Material: HIPS Plastic (Black / Granite) UL 94 HB rated
Power: Display Module: 12VDC @ 2.5A Max, 30Watts
Power Adaptor: 85-264 VAC 47–63 Hz
Display: 8 characters, 1cm height, red, 1 micron resolution
Mounting Options:Tabletop, 4 rubber feet prevent sliding
Serial Interface: Baud Rate 19200, 1Stop Bit, No Parity, No Handshake
Communications Protocol: ASCII
Commands Supported:
V: Version Report
C: Configuration Report
P: Position Report
+: Advance one step
- : Retract one step
L: Set Language
Z: Set Drive Limit
E: Echo to display
3. Protective Storage Case:
Material: Unbreakable black structural resin plastic shell with foam interior cut in 1.26 cm segments to be
removed to configure for componenents
Dimensions: 41(l)x34(w)x18(h) cm, (16-1/8” (l)x 13-1/4”(w)x 7”(d)) Weight: 3.2 kg (7 lbs.)
4. Sterile Drape Sleeves:
Material: Kraton
Dimensions: 17.8cm(d) x2.4m (7” (d) X 8'), open,
20x30x.3cm (8"x12"x1/8"), packaged
Sterilization: Presterilized by EtO
Package quantity: 20 each in individual sterile packages
